产品

Products

Wet Type Ball MillWet Type Ball MillWet Type Ball Mill
Wet Type Ball MillWet Type Ball MillWet Type Ball Mill

Wet Type Ball Mill

The wet ball mill is the key equipment for crushing the materials after been crushed coarsely. It consists of main parts such as feeding part, discharging part, turning part and transmission part. 

Description

What is wet type ball mill?

The wet ball mill is the key equipment for crushing the materials after been crushed coarsely. It consists of main parts such as feeding part, discharging part, turning part and transmission part.

For what

Ball mills are widely used in cement, silicate products, new building materials, refractories, fertilizers, black and non-ferrous metal beneficiation and glass-ceramic industries, and dry or wet grinding of various ores and other abrasive materials.

Working principle

The motor drives the cylinder to rotate through the deceleration device. The crushing ore and steel ball in the cylinder are subjected to friction and centrifugal force when the cylinder rotates,after been brought to a certain height, due to the action of gravity, the ore will fall, and been crushed and ground gradually under the action of impact . The crushed ore is discharged out of the drum through the discharge section. After the discharged minerals are classified into qualified products in a spiral classifier, the coarse ore is returned to the ball mill through the combined feeder and the grinding continues. Combined with the feeder feeding continuously and evenly,the ore enters the ball mill continuously and uniformly , and the ground material is continuously discharged from the ball mill, thus the ball mill is a grinding device that can continuously work.

Feature

1. Low wear rate. The machine is composed of feeding part, discharging part, turning part, and transmission part (reducer, small transmission gear, motor, and electric control). The hollow shaft is made of cast steel and the inner lining can be replaced. The slewing bull gear is processed by casting hobbling. The barrel body is inlaid with a wear-resistant liner and of good wear resistance.

Wet type ball mill is a new type of ball mill ,which adopts special rolling bearing as supporting structure of cylinder body. It systematically solves the problem of cylinder turbulence,increasing the life of the heavy-duty rolling bearing used for sliding bearings and aligning problems, sealing problems under harsh environmental conditions.
2. Energy-saving. Compared with the traditional ball mill, this kind of ball mill can reduce the motor power, saving the lubricating oil, the cooling water, and more energy; saving a lot of maintenance costs,time and labor.

Technical Parameters

Model

Ф1800

Ф2200

Ф2500

Ф2800

Ф3200

Ф3600

Ф4200

capacity(t/h)

3

8

10

16

17

18-22

33

Rotary speed(r/min)

19

14.25

11.81

11.14

11.18

9-12

7

power(kw)

5.5

7.5

11

11

15

18.5

30

inclination  angle    ( o )

45

35~55

35~55

35~55

35~55

45~55

40~50

weight(kg)

2240

3150

4910

5660

6520

7120

9672

 

CONTACT US

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

  • *
  • *
  • *

CONTACT US

+86-0371-86197999
info@seasunmac.com
+86-138 3826 9870